A3209TL

APPLICATION

Designed primarily for use with LP-Gas and anhydrous ammonia as a main valve on small capacity pumping systems. Installation is quick and easy, and it fits in both full and half couplings, as well as, in-line applications. The valve may be actuated manually by hand or cable.

A3210PA

APPLICATION

Designed primarily for use with LP-Gas and anhydrous ammonia as main valve on pump systems with small capacity, such as motor fuel dispensers. It may also be installed in bottom liquid withdrawal openings in NH3 nurse tanks or the vapor equalizing opening of bobtail delivery trucks. Installation is quick and easy, and must be installed in a modified half coupling o the equivalent. The valve may be actuated manually by cable or pneumatically.

A3217 FR SERIES

APPLICATION

Designed primarily for LP-Gas and anhydrous ammonia filling and/or withdrawal on MC331 bobtail delivery trucks, transports and stationary storage tanks with flanged pumps or piping. Installation is quick and easy, and the valve may be operated manually by cable or pneumatically. Lever available on right or left side to allow for installation without the use of an extra pulley.

A3219FPA

APPLICATION

Designed primarily for LP-Gas and anhydrous ammonia service on MC331 transport pressure vessels and large stationary storage tanks. Installation is quick and easy, and it fits in most existing tank flanges. The valve may be actuated manually or pneumatically.

DOT MC331

APPLICATION

Designed especially for use with internal valve installed in DOT MC331 pressure vessels. The A3219RT provides a remote means of mechanical closure along with thermal protection, as required by DOT MC331. When properly installed the cable will trip the internal valve release lever(s) allowing the connected handle(s) to move to the closed position.

3200C AND 3200L

APPLICATION

The 3200C remote cable kit is designed especially for use with the 3200L remote operating lever to operate internal valves from a remote location. The internal valve is opened by pulling back the remote operation lever and closed by returning the lever to its original position. A remote release is provided to close the internal valve from a different remote location.

A3213PA SERIES

APPLICATION

Designed primarily for use with LP-Gas and anhydrous ammonia for liquid withdrawal; vapor transfer or vapor equalization of bobtail delivery trucks, transports, stationary storage tanks, and in-line installations. The valve may be operated manually by cable or pneumatically.